How to Reset Canon Printer Error 5B00 MP237. This indicates that the printer is asking us to reset. For steps, Reset:
Make sure the printer Driver is installed properly.
- Turn off your printer by pressing the power button, leave until completely dead.
- Remember the power cable (electrical) is still in a State of installed.
- Press the RESUME for a little over 2 seconds
- After that you press the POWER button until the green light turns on (when pressing the POWER button, do not RESUME button is released first)
- Then release the RESUME button, but do not loose POWER button.
- While the POWER button still depressed, press the RESUME button 5 times. The led will light up alternately Flash green with orange of the last orange. (don't get mistaken 4 x because the printer will die miserably, but its nature while also)
- Release both buttons simultaneously.
- The led will blink briefly and then it will flash green.
- The computer will detect the new device, disregard it
- This state indicates the State in MP237 printer SERVICE MODE and ready to be reset.
The next step is to reset the printer, You must have software Resetter in advance
- Download Software Resetter Canon MP2370 [DOWNLOAD Here]
- Extract it Software Resetter Canon MP237yang You download.
- Prepare 2 paper in the printer (to print at the time this process is reset).
- Start The Application/Software Resetter Printer Canon MP237
- Press on the appropriate application of the sequence number in the picture below:
- Select the No. 1 then the printer will reset the ink absorber counter,
- then choose No. 2 then the printer will print one page with the words "D = 000.0"
- After that Select No. 3 then the printer will reset your results just print..
- After that turn off the Printer and turn on again.
- Reset Canon MP237 managed ....